MICROLASER

STA-01SH-OEMAR

SPECIFICATIONS

Parameter

Value

Notes

Operating mode

pulsed

Repetitively passively Q-switched

Wavelength [nm]

532

Second Harmonic of Nd:YAG 1064 nm (4F3/2 - > 4I11/2 transition)

Average Power [mW]

≥23

Measured at 100 kHz.

Pulse Repetition Rate PRR [kHz]

100

Laser operating PRR

Pulse Duration FWHM [ps]

450 ± 50

Measured at 532 nm

Pulse Timing Jitter [ns]

<300

Expected to be less than 50 ns

Average Power Stability [%]

RMS

≤ 1

Over 8 hours, after 30 min warm up.
Room conditions, Tamb = 23 ± 2 C

PTP

≤ 10

Spatial Mode

TEM00

Half-angle beam
divergence 1/e2 [µm]

Available upon request

Beam Diameter 1/e2 [mm]

0.80-1.20

M2

≤1.3

Polarization

Linear, better 100:1

Ellipticity [%]

≤20

Pulse Spectral Structure

SLM

Interfaces

USB,
External Triggering (TTL rising edge)

Laser Head Dimensions
Height x Length x Width [mm]

99 x Ø 24

51 x 99 x 51(including Heat sink)

Laser Controller Dimensions
Height x Length x Width [mm]

51 x 179 x 150

Laser Controller Weight [kg]

≈ 0.8 - 0.9

Laser Head Cooling

Provided

Heat Sink (refer to environment and mounting requirements)

Laser Controller Cooling

Not provided

(refer to environment and mounting requirements)

Electrical specifications:

Input Power Voltage

5VDC ± 0.25V

Current

<8A

Typical < 6 A (at room temperature),
cold start < 8 A

Operating environment requirements:

Operating Conditions

Tamb = 23 ± 2 C, humidity 45%-60%

Non-condensing environment.

Temperature of baseplate for Laser Head mounting

<30

recommended

Temperature of baseplate for Controller mounting

<30

recommended

Warranty

5000 hours or 12 months.

Whatever occurs first.